Rear Seatbelt Removal

[oompahlumpa]

Remove the 17mm bolts anchoring the seat-belts to the floor of the car.

Remove the rear interior back panel.

-Remove all plastic access panels.

-Remove all screws/bolts.

-Lift out the panel.

Remove the rear interior side panels

- Un-bolt speaker pods (3 bolts each).

- Remove the plastic seat-belt slots from the rear speaker pods.

- Slide the seat-belt through the slot in the speaker pods

- Remove all screws/bolts from the rest of the side panels.

- Open rear-side windows.

- Lift up the weather stripping along the bottom edge of each window.

- Pull side-panels out and lift up to remove.

Remove seat-belt retraction mechanism (two 17mm bolts each side).

Re-install the side and rear interior panels (reverse of removal).

information provided by: 4thgenerationcivic.com