| 08-18-2005, 08:08 AM | #1 |
|
Junior Member
Join Date: Sep 2004
Posts: 15
|
i have a Faze gauge air fuel ratio gauge. i have everything hooked up but need to know what wire on the O2 sensor to connect the green wire from the gauge to. If any1 knows please help
|
|
    
|
| 08-18-2005, 09:11 AM | #2 |
|
Super Moderator
Join Date: Jul 2003
Location: Nor*Cal
Posts: 2,186
 |
Should be a white wire.
|
|
|
|
| 08-18-2005, 12:52 PM | #3 |
|
Senior Member
Join Date: Jul 2003
Posts: 2,654
|
Don't tap into the the O2 harness directly, Tap into the ECU harness. It's pin number 14 on the D harenss, white with red stripe.
|
|
|
|
| 08-18-2005, 03:03 PM | #4 |
|
Senior Member
Join Date: Dec 2004
Location: kailua, hawaii
Posts: 228
|
i thought for 92-95 the wire was orange with a stripe at the ecu?
|
|
|
|
| 08-18-2005, 05:10 PM | #5 |
|
Junior Member
Join Date: Sep 2004
Posts: 15
|
i looked on the ecu and the wire in d14 is solid white. and i tried hooking the wire to the white wire on the O2 sensor. i get nothing. when the car is just turned to the accesory position, i have a light on but when car is cranked up and running i have nothing. any1 kno wut to do?
|
|
|
|
| 08-18-2005, 05:45 PM | #6 |
|
Junior Member
Join Date: Sep 2004
Posts: 15
|
ok i have tried hooking the wire up to the ecu on pin d14...i get nothing until i turn the car off. as soon as i turn it off the gauge lights up and then turns off... could that mean my O2 sensor is bad or wut? but shouldnt the gauge do something even if the O2 sensor is bad?
|
|
|
|
| 08-18-2005, 07:01 PM | #7 |
|
Senior Member
Join Date: Dec 2004
Location: kailua, hawaii
Posts: 228
|
let me get home and ill look in my haynes manual. just to make sure it is a 94 ex right. i got a 95 ex and when i get home ill post what i find.
|
|
|
|
| 08-18-2005, 07:08 PM | #8 |
|
Senior Member
Join Date: Jul 2003
Posts: 2,654
|
|
|
|
|
| 08-18-2005, 07:14 PM | #9 |
|
Junior Member
Join Date: Sep 2004
Posts: 15
|
no the civic i have now is a 95 dx with a d15b vtec swap. could that have anything to do with it?
|
|
|
|
| 08-18-2005, 07:24 PM | #10 |
|
Super Moderator
Join Date: Jul 2003
Location: Nor*Cal
Posts: 2,186
|
No, all OBD1 pinouts are the same.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Engine Compresion Ratio Formulas | simplegreen | General / Technical Information | 0 | 07-22-2004 03:00 PM |
| Erratic Fuel Gauge | imported_civic bob | Civic | 4 | 07-21-2004 03:03 PM |
| Fuel Gauge Problem | imported_civic bob | General Tech | 1 | 07-20-2004 03:09 AM |
| Rod Ratio | civic31g | Hybrid Honda | 1 | 01-20-2004 04:56 AM |
| Innacurate fuel gauge | imported_DIYperformance | General Tech | 3 | 11-25-2003 05:01 PM |
Linear Mode
