| 09-02-2005, 06:01 PM | #1 |
|
Junior Member
Join Date: Sep 2005
Posts: 1
|
hello. could anyone give me any help? I need tightening orders and right torgues for the assempling a head gasket..the car is -90 civic 1.3 hb with carburator...and if someone smart enough knows something about valve clearances, please let me know...thanks.
|
|
    
|
| 09-02-2005, 07:30 PM | #2 |
|
Senior Member
Join Date: Jul 2003
Posts: 5,381
|
manual says to go in sequence to tighten them.
See the diagram i've included below. it says to do that one time through at 22 foot pounds. Then go back a second time and torque to 49 foot pounds. As for the valve clearances. The intake side is 0.17-0.22 millimeters or 0.007-0.009 inches The exhaust side is 0.22-0.27 millimeters or 0.009-0.011 inches let me know if you dont know how to do that i'll explain |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| B20 Vtec Info | Vtec_Power | Hybrid Honda | 47 | 08-06-2006 03:57 AM |
| B20 info | cynosurecivic | Hybrid Honda | 1 | 11-25-2003 03:12 AM |
| web pg hosting info . . . | imported_biocac | Off-Topic | 2 | 11-02-2003 01:03 AM |
| Need Some Info... | imported_bricrx | Hybrid Honda | 9 | 08-13-2003 05:18 PM |
| Cx Info | imported_orange | Civic | 13 | 08-08-2003 03:04 PM |
Linear Mode
