| 08-31-2005, 04:33 AM | #1 |
|
Member
Join Date: Aug 2005
Posts: 41
|
i just purchased a blue hondata s200 with a p28 ecu, 450cc DSM injectors, eeprom chip, stuff to chip with,resisitor box, 3 bar map sensor, and push button to set RPMS? for 545.00, did i get a good deal? the hondata has boot..here are some pics.
  the guy had a dyno sheet showin a stock b16 with t3/t4 turbo puttin down 343hp/272 ft/lbs torque with this setup also, whats an eeprom chip? |
|
    
|
| 08-31-2005, 05:01 AM | #2 |
|
Member
Join Date: Aug 2005
Posts: 41
|
also is this a good turbo to put on my civic with GSR engine swap?
_________________________________________________ BRAND NEW SUPER FLOW T3/T4 T04E TURBOCHARGER STAGE III WHEEL .50 A/R COLD .63 5 BOLT STANDARD HOT SIDE 3"INLET DIAMENTER 2"OUTLET .57 COMPRESSOR WHEEL TRIM .60 A/R COMPRESSOR .63 A/R TURBINE 57 TRIM TURBINE WHEEL: EXDUCER:2.48" MAYOR:2.89" COMPRESSOR WHEEL EXDUCER: 2.07" MAYOR:2.36" 25-35 PSI PEAK POWER PERFORMANCE OUTPUT CAPABILITY CNC MACHINED FLANGES HIGH QUALITY T04E, WITH FORGED TURBINE PROPELLER WHEEL EVERY INDIVIDUAL TURBO COMES WITH ITS OWN SERIAL NUMBER __________________________________________________ ____________   |
|
|
|
| 08-31-2005, 11:46 AM | #3 |
|
Senior Member
Join Date: Dec 2003
Posts: 868
|
an eeprom chip is what has the program on it, its the map your car will run off of. most tuners have extra chips. i dont see a 3bar map sensor there but if he says its included then i dunno. who makes that turbo..to me it looks like an ssautochrome turbo, which i would not use one...they dont last very long from what ive seen, other people might have a different opinion. when you buy a turbo you dont wanna skimp, you wanna get the good stuff.
|
|
|
|
| 08-31-2005, 04:17 PM | #4 |
|
Member
Join Date: Aug 2005
Posts: 41
|
honestly, i am skipping on the turbo...i cant afford the latest and greatest right now, i plan to upgrade to something made with quality soon. but i just have no cash right now, but do you think this will do for a few months running on 15 psi occasionly....5 psi for daily driving
|
|
|
|
| 08-31-2005, 09:30 PM | #5 |
|
Senior Member
Join Date: Dec 2003
Posts: 868
|
most likely it will last for a while...
|
|
|
|
| 09-01-2005, 12:16 AM | #6 |
|
Senior Member
Join Date: Nov 2003
Posts: 253
|
Ive seen pics of ssac turbo's crack in half after a week. By my own personal experience of owning one of there manifolds, i wouldn't pay $5 for one of their turbo's. But hopefully it will last you for a while, but after that good luck on selling it used, cause everyone knows theyre a crap brand.
|
|
|
|
| 09-01-2005, 01:41 AM | #7 |
|
Member
Join Date: Aug 2005
Posts: 41
|
man i dont wanna hear that lol...im doin everything i can to get turbo running...i bought everything i needed to run properly...im gonna be pissed if it breaks...
|
|
|
|
| 09-02-2005, 07:53 PM | #8 |
|
Senior Member
Join Date: Nov 2003
Posts: 253
|
Hopefully in your case you will have better luck. But if it does break, dont b to surprised. Id almost sell it new now, and check out www.turboengineering.com and just get a good turbo right away and not have to worry about it going out on you after you get it all setup, cause trust me it sucks.
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Hid - So Many Which One Is Good? | imported_Pumanator | Civic | 9 | 10-29-2005 04:21 PM |
| Is This A Good Kit? | imported_blk95civ | Suspension | 5 | 06-06-2004 09:49 PM |
| Here's A Good One | imported_mntdewred | General Tech | 2 | 01-07-2004 06:11 AM |
| Am I Good to Go? | imported_ryancg121 | Civic | 4 | 12-27-2003 05:00 AM |
| Good Lowering Springs For Good Price? | Doughboy | Suspension | 17 | 09-18-2003 02:07 PM |
Linear Mode
