B16 Build Project

[Hybrid_Coupe]

you cant bore it to 2.0 without sleeving it...i wouldnt bore it at all unless your going to sleeve it...on a boosted motor i would say go with 9:1 compression. my personal motor is at 9.8:1 but its basically a race motor. I would get cp pistons, with a set of decent rods...if your going for a lower hp set up...go with a set of eagle rods(just cause i really dont like eagles, although some people have had good luck with them), i personally run Crowers in my motor. and at bare min. i would do springs, retainers and valves. just to be on the safe side.