Sohczcvtec Wont Start

[civichbzcvtec]

yup there is a zc single slam vtec i was amaze my self when i saw it at first i was gonna get the jdm d15b but friends told me to go 4 the zc cuz of it 1.6

[civichbzcvtec]

could it be that the fuse for the ecu aynt working? because i just notice that the fuse for the ecu is a 10 and not a 15

[imported_mr7]

Does it make any sounds when you try to start it?

[civichbzcvtec]

naw aw all u hear is the engine cranking and like wanting to turn on but nothing so i was wonder if that can be the problem if the 10 fuse needs to be a 15 insted

[imported_tegs]

Originally posted by Calesta@Jan 25 2004, 01:48 PM
Cool.* Thanks!* Would you be able to take a picture of the engine- one that has both the ZC stamp and the VTEC solenoid in the same frame?

[imported_DIYperformance]

Originally posted by civichbzcvtec@Jan 27 2004, 12:20 AM
naw aw all u hear is the engine cranking and like wanting to turn on but nothing so i was wonder if that can be the problem if the 10 fuse needs to be a 15 insted

No, the fuse is just the protector. It wouldn't have anything to do with starting unless it was blown. If you're supposed to have a 15, then put one in- but it has nothing to do with your problem because even though it might not be the correct one, it isn't blowing.

You already saw that you had no fuel in your hoses, so from those hoses you have to trace the line back from that hose until you find which piece is causing your problem. Check the fuel hoses for crimps too.

Also, if you have a digital voltmeter, you should test the ignition coil just to be on the safe side.

[civichbzcvtec]

alrite thanx