I'm Having A Whore Of A Time . . .

adiction bass, actually its not as bad as you think...many people do this

[imported_biocac]

That is f**king ingenious!!! If if can get it all back togeather and running tomarrow morning, I just might try that as well. I'm holding out on "big bertha" right now though . . . My friends 1" impact gun, lol

Thanks again!!!

[imported_myculito]

WD-40? Helped me get some bolts loose recently!

Hey, you never know?

man you gotta post a pic of a 1" impact gun.

[imported_biocac]

Dan, I def. can't get the 1incher, lol It's one of those things that apparently has to stay in his garage. Damn it! I know that that'd get it off . . no question!
Here's what it looks like



As you can imagine from the pic, it's quite awkward to operate and come to think of it . . I might not of had enough operating space were I'm trying to get to.

Back to the start . . .

[orangecivic94]

i had that same problem with my engine all i did was what they said lower the engine but i only used a 3/4 inch impact with about 180 psi the the air compressor without an extension the extnsion takes away the torque of the impact. it came of with the hits of the tigger.

[imported_biocac]

My air hose is only 6 feet long . . that's what I can't understand. I've got no air loss and the 3/4"er that I used seemed useless . . now it is since I blew out it's seals! :slapping forehead:
Oh well . . like I said . . back to the start.

[j diggi]

Originally posted by biocac@Mar 19 2004, 09:51 AM
My air hose is only 6 feet long . . that's what I can't understand.* I've got no air loss and the 3/4"er that I used seemed useless . . now it is since I blew out it's seals! :slapping forehead:
Oh well . . like I said . . back to the start.

Pressure means little if you don't have enough CFM's. Granted I don't know your setup but this could be a possibility. I think most 3/4 wrenches use around 8-10 CFM @ 90 PSI. Most portable compressors (5hp, 30gal, or around there) only produce about 5 CFM @ 90 PSI. But if you do have a stationary compressor you should be good, they average around 10 CFM @ 90 PSI.

[imported_biocac]

The compressor that I'm using is max'd out at just over 120 psi so I still don't see where I'd have lack of ass behind my gun. Since it's blown out now, I have to wait untill I can get my hands on another one.

Thanks for the heads up on that one though!