Tranny Imstallation

[h22a4Eg6]

how do i install a b series tranny on a 95 del sol i wouldt need a step by step Pic or some kinda guide would help.. i kno i need a floor jack for one ooh yea tranny is already out of the car.

[simplegreen]

i assume this was a b series motor in the car?

[dubcac]

Get a friggin helms manual.

[NstyGrnHatch]

cspeedracing.com they have a detailed b series tranny removal and installation guide.

[adictionbass]

its pretty self explainatory. Put the car up. Put something under the oil pan to support the motor. Starting taking shit off. exhaust if thats still on there, tranny side upper mount, front tranny bracket, i think 2 bolts on the rear bracket, unhook the VSS (speed sensor) and reverse indicator light, whatever random clips/brackets that are left, unbolt the tranny, and tehre ya go.

PS: I just typed all this and realized he is only installing a tranny, but im not going to re-write all this stuff.

[twowayparadise]

and i spelled installation wrong lol.. what was i smokin.. hmm when anyways the tranny is out the shop took it out hmm i need to kno how to put it back in

[Smooth_Imports]

do it like this. Jacker up your motor with a pipe of wood between the oil pan and the jack. Take off the driver side mount and let the jack down alittle. This will lower the motor a few inches. Make sure you don't go to far or you'll rip your rear mount. With another jack , jack up the tranny, Make sure the splines are lined up and push it in withyou hands. Once the dowels hit the block get a rubber malet and hit the gear houseing front the back to get the dowels to lock inthe thw bell housing on the tranny. Bolt it up, Jack both jacks up , Put mounts on and your done/