Need Info For My B18c Swap Into My Eg Coupe

[DjHonda247]

It's been a few days, so I was just wondering if anyone could see if I am on the right track as far as the mount and 2 or 3 bolt set-up from my last post. Thanks

[Toyz-B-Us]

It depends on what is on the motor for the 2 or 3 bolt. If your car is an ex, you can use the stock mount. I would recommend taking a pic of your drivers mount on the motor and a pic of the driver's mount with your motor and also the other mounts it came with. It would be easier to tell you what to do based on what you have since there are different options out there. Also if you are keeping the motor fairly stock and it is a daily driver type car, I would stick with stock mounts instead of urethane aftermarket.

[DjHonda247]

Ok...I am sorry, but I am kind of confused, so please bare with me. My b18c motor is complete with all the mounts and brackets. I have a 95 ex car for the swap. Since my motor is complete, do I need to buy any new motor mounts or any brackets at all? If I wanted to keep a/c then I would need to buy a 96-97 sol si vtec a/c compressor bracket? If I want to buy new brackets and mounts then this is what I would need to buy and/or be swappping out if I bought aftermarket?

94-01 integra or 99-00 Si Coupe front tranny bracket (from any 5speed model)
94-01 integra rear engine bracket (from any 5speed model)
94-01 integra driver side 3-post mount (if going B18B/C/C5)


I hope I am making sense!

[Toyz-B-Us]

Yes you should be set besides a/c. Use the Integra driver's mount. Use the integra's tranny front and side mount. Use the Integra's rear mount. The rear mount will consist of the Civic's stock mount that is on the car and the Integra bracket that came with the swap.

[DjHonda247]

Can I use my existing hardware such as the nuts, bolts, and washers to mount and secure my b18c or do I need to buy new crap?

Also found a parts break down here. For the use of other people that ask the same question as me, are #'s 6,8,9,11,15 all the mounts and brackets that someone would need to buy to complete the swap assuming they dont have the parts?
http://www.acuraoemparts.com/delray/jsp/pr...=All&vinsrch=no

[civic_gsr]

the eg and gsr engine is pretty much the same all gsr mounts will work. i used all gsr mounts on my 95 hatch.

[civic_gsr]

the eg and gsr engine bay is pretty much the same all gsr mounts will work. i used all gsr mounts on my 95 hatch.