Need Info For My B18c Swap Into My Eg Coupe

[DjHonda247]

Does anyone have a list of part #'s for all the mounts, brackets, pumps or whatever else I may need to buy for my swap into my 95 civic ex. Or a good website that will have all that information? Thanks

[DjHonda247]

Am I going to need the same brackets that a 96-00 civic uses for a b-series swap?

[Toyz-B-Us]

from ffsquads site

94-01 integra or 99-00 Si Coupe front tranny bracket (from any 5speed model)
94-01 integra rear engine bracket (from any 5speed model)
94-01 integra driver side 3-post mount (if going B18B/C/C5)
Note: You can reuse your existing civic/delsol driver side dual-post mount if going OBD2 B16A
94-01 integra or 99-00 Si Coupe A/C bracket
(NOTE: Del Sol VTEC a/c bracket is needed to keep a/c using the Civic compressor)
94-01 integra or 99-00 Si Coupe complete shift linkage
Note: Delsol owners, you must use a B-series delsol shift linkage (rare to find used; best if bought brand new from Honda)
94-01 integra or 99-00 Si coupe complete axles including half-shaft

[suckawillis]

<div class='quotetop'>QUOTE(DjHonda247 @ Aug 16 2006, 09:23 PM) [snapback]103665[/snapback]</div>

Am I going to need the same brackets that a 96-00 civic uses for a b-series swap?
[/b]

if you bought a complete b18c you have everything you need. actual rubber mounts are all stock civic except for driver top mount in which the stock one can still be used. rear t bracket must be manual integra.
any integra axles(excluding type r) 94-01 abs or non will work or 99-00 civic si. same for halfshaft.

[DjHonda247]

What both of you guys said doesn't make sense. I am sorry if I am just reading it wrong and my questions were pretty open ended. One of you gave me a whole list and the other said if the engine is complete with everything then I should be fine. The car is obd 1 and the b18c is obd1 and jdm. So far I know 96-97 del sol si a/c compressor bracket......?

[suckawillis]

<div class='quotetop'>QUOTE(DjHonda247 @ Aug 16 2006, 07:57 PM) [snapback]103660[/snapback]</div>

Does anyone have a list of part #'s for all the mounts, brackets, pumps or whatever else I may need to buy for my swap into my 95 civic ex. Or a good website that will have all that information? Thanks
[/b]

what was listed were the mounts and brackets needed to swap the b18c into your 95 coupe, as asked.
if you needed components for a/c and power steering , just ask. Your question was very vague

[DjHonda247]

Well my engine appears to be complete, so what you are saying is that I don't need anything to bolt the motor in. And if I want a/c then I need to get a del sol bracket.

[DjHonda247]

Can you let me know if these mounts are all I need to complete the swap and bolt my engine in? http://cgi.ebay.com/ebaymotors/AVID-ALUMIN...017751106QQrdZ1
Also, is #1 the a/c compressor bracket that I will be needing from a 96-97 sol? http://www.hondaautomotiveparts.com/auto/j...E+MOUNT+%281%29

[suckawillis]

<div class='quotetop'>QUOTE(DjHonda247 @ Aug 19 2006, 11:39 AM) [snapback]103787[/snapback]</div>

Can you let me know if these mounts are all I need to complete the swap and bolt my engine in? http://cgi.ebay.com/ebaymotors/AVID-ALUMIN...017751106QQrdZ1
Also, is #1 the a/c compressor bracket that I will be needing from a 96-97 sol? http://www.hondaautomotiveparts.com/auto/j...E+MOUNT+%281%29
[/b]

Dont buy avid mounts, I would reccomend Innovative, cheap and good www.innovativemounts.com
and yes that will be all you need for mounts, and the integra rear t bracket, your stock upper tranny bracket will work fine.

And yes that is the bracket you will need to hook up your sohc a/c compressor

[DjHonda247]

Is this the teg rear t bracket that I will need along with the mount? http://cgi.ebay.com/ebaymotors/94-01-Acura...sspagenameZWDVW
Which mounts? The two bolt set-up or three?
http://www.innovativemounts.com/ShowProduc...px?prodid=19550
http://www.innovativemounts.com/ShowProduc...px?prodid=10150

Thanks for all you help bro!