Swap B16a In 2000 Ex

[karizmah]

Originally posted by Doughboy+Jun 7 2005, 05:14 PM--><div class='quotetop'>QUOTE(Doughboy @ Jun 7 2005, 05:14 PM)</div>

Hes converting an auto > manual you do know that right?[/b]

yeah he could use the harness still right?

i guess the clip wouldnt come with everything then.

[YBLEGAL]

The clip has a manual transmission. So I understand I have to buy the hasport motor mounts. Are these the right ones? Also you say I will have to cut a hole in the firewall for the shift linkage? You said my automatic ECU won't read the manual engine, well i'm getting the clip, that comes with the ecu...no? That's what it said...lol Also this engine is the Gen2 from 92-95 so that means it's OBD1 right? and my car is 2000, OBD2 right? I read an article on how to rewire it, but is there any adapters you know of that make it easier. I'm just looking for the cleanest swap possible, you know...just trying to get as much info as i can. We are ordering the engine tonight, cuz no matter what that engine is going in there..hah

[Doughboy]

i forgot the fact your getting the front clip ok your cool then..but they have to hook up the clutch pedal and all that shit isnt prepped on your car which is time consuming but other than it sounds all good..

[karizmah]

Originally posted by YBLEGAL@Jun 7 2005, 05:24 PM
The clip has a manual transmission.* So I understand I have to buy the hasport motor mounts.* Are these the right ones?* Also you say I will have to cut a hole in the firewall for the shift linkage?* You said my automatic ECU won't read the manual engine, well i'm getting the clip, that comes with the ecu...no? That's what it said...lol Also this engine is the Gen2 from 92-95 so that means it's OBD1 right? and my car is 2000, OBD2 right?* I read an article on how to rewire it, but is there any adapters you know of that make it easier.* I'm just looking for the cleanest swap possible, you know...just trying to get as much info as i can.* We are ordering the engine tonight, cuz no matter what that engine is going in there..hah

you'll need an obd2b to obd1 ecu conversion harness
to be as clean as possible, they're not much and it'll
save you some headaches.

[YBLEGAL]

you'll need an obd2b to obd1 ecu conversion harness
to be as clean as possible, they're not much and it'll
save you some headaches.[/quote]

Thanks, that's what i was looking to find...do you know who makes them or know where to get one?

[Doughboy]

ebay has them cheap

[simplegreen]

we have a member on our site that sells them. I have one already. http://www.civicland.com/forums/inde...showtopic=5898

[Smooth_Imports]

you do not need HAsport mount, you can use 99-00 SI mounts/brackets or 94-01 integra mounts/brackets.
You need the rear "T" mount driver side mount and front tranny mount. The front tranny mount should come with your swap and should be able to be used on the new car.

[YBLEGAL]

wow, thanks everyone for the info. I've found a mechanic in my area now who's gonna start working on it real soon, i ordered the engine and stuff about 2 days ago...I'll be sure to stay around, you guys know what your talkin about ...lol. Thanks for the help again.