| 01-09-2006, 09:21 PM | #1 |
|
I found someone in my area selling this engine:
(this is what the ad reads) B18A1 Motor and transmission. Micro polished and balanced crank, ac block guard, pr4 pistons, new gaskets, arp head studs and much more. $350 (end) Now based on this information, i have been trying to decide if this is a good project for someone with my very little engine experience *other then replacing a d-engine tranny/cluch 2 times* to undertake? I would probably make this my project for a while, like save money and buy parts, to make the engine better. But I am wondering if this is just a money hole? Should I wait for a different motor to come around and work on that? or should i look into getting this one? I have a 98 civic DX, so i am not sure exactly all that I would need to get to make this work in my car. Since I do want, AC, PS, ect... I know I need a OB0 ECU, motor mount kit. And new engine harness. What else would I need if I was to get this engine and put it in? Well thanks for the help! -Stephen
__________________
'98 Civic DX Next on the list: Bondo Paint Rims <strike>TYC Projectors</strike> <strike>Si Grill</strike> <strike>Rear Spoiler</strike> Check out what I have done so far! |
|
|
|
|
| 01-09-2006, 10:19 PM | #2 |
|
i wouldnt do it.. the obd is different and cable tranny vs. hydraulic.
__________________
It just goes to show you that no matter how full your life may seem, there's always room for a couple of beers. |
|
|
|
|
| 01-10-2006, 01:48 AM | #3 |
|
Senior Member
Join Date: Jun 2005
Posts: 611
|
not to mention it's technically an illegal swap... engine has to be as old or newer than your car...
__________________
98 civic ex sedan... Boost in progress... http://i4.photobucket.com/albums/y12.../Siege9111.jpg |
|
|
|
| 01-10-2006, 02:02 AM | #4 |
|
Agreed with above. You wouldn't need the ECU/Harness, you can use your stock harness, and run an OBD2 LS ECU...the obd0 won't work in your car. However, as they said above, it's illegal due to manufacture year, and it has a cable tranny instead of hydraulic. Look for B18B or a B20B/Z.
|
|
|
|
|
| 01-10-2006, 03:33 AM | #5 | |
|
<div class='quotetop'>QUOTE(dubcac @ Jan 9 2006, 10:02 PM) [snapback]98426[/snapback]</div>
Quote:
Awesome, thanks guys, yeah it would be a big money hole for me, since i dont have much know-how yet on this type of thing. I will keep my eye out for a b18b. Thanks guys
__________________
'98 Civic DX Next on the list: Bondo Paint Rims <strike>TYC Projectors</strike> <strike>Si Grill</strike> <strike>Rear Spoiler</strike> Check out what I have done so far! |
||
|
|
|
| 01-10-2006, 03:56 AM | #6 |
|
a B18B1 would be sweet in your car. a nice light DX with a newer B18b1 would be nice..
|
|
|
|
|
| 01-10-2006, 02:49 PM | #7 |
|
Senior Member
Join Date: Aug 2005
Posts: 350
|
At the end of the month, i'm buying a new car, just closed a huge deal at work, so i'm gonna buy another hatch most of the ones around here have swaps already so i'll probably get one with a ls swap or something and drop my gsr in there, so i should have a swap with a cable trans that i'll be looking to sell soon, I'll keep you posted. My reasoning for buying one swapped already is that i'll most likely get a suspension and exhaust that way and save a little money
|
|
|
|
| 01-10-2006, 03:21 PM | #8 |
|
I think a hydro swap would be better for my car, since its already has a hydro tranny and stuff. So i dont think i want a cable tranny.. correct?
__________________
'98 Civic DX Next on the list: Bondo Paint Rims <strike>TYC Projectors</strike> <strike>Si Grill</strike> <strike>Rear Spoiler</strike> Check out what I have done so far! |
|
|
|
|
| 01-10-2006, 04:31 PM | #9 |
|
Senior Member
Join Date: Aug 2005
Posts: 350
|
hydro was what i meant, yeah a swapped eg would have to be hydro
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| B18b1 Head On A B18a1 Bottom End? | jtw156 | General Tech | 7 | 12-26-2005 04:00 PM |
| B18a1 Block With Which Head? | dietre | Hybrid Honda | 16 | 08-29-2005 05:13 PM |