New Stuff!

[soulexistence]

I got coilover springs, and my mechanic was gonna put them on when he noticed i have bad shocks. well, that makes sense why the tires were scrapin. So i ordered KYB GS-2 shocks, got a great deal on ebay for 200$.

They'll be here on wednesday, so i'm gettin new shocks & coilovers. pretty sweet.

I list all my mods and upcoming stuff in my sig, but don't know what you guys are doin with yours.

How about sharing what your projects are. What are you doing to your civ? what are your plans? got a unique paint color in mind? Saving up for that turbo? what?

[Chino Kapone]

sounds like you have a good project goin.

my mods on my 96 black ex w/d16y8 go as follow....

short ram intake
power tone exhuast with glass pack for that ultra quiet sound
aem fuel rail
b&m fuel pressure reg.
skunk2 intake manifold
venom cam sprocket
venom injectors
denso iridium spark plugs
msd sci ignition, msd 8.5 mm plug wires, msd blaster cap
act clutch, act flywheel
dc header
nuespeed strut tie bar, rear strut tower bar
tein ss coilovers,
skunk2 camber kit
17" bsa wheels wrapped in khumo 711's
blacked out head lights 99-00 tails

Plans are as follows: paint it flat black, skunk2 throttle body, new cam w/ valve springs and retainers, new ecu.... goo times

[soulexistence]

sweet. i'm holding off on any of the engine performance stuff until after i get in the new powerplant. working on the suspension first, then after i get the engine, i'll get my body kit and paint it all while i have the d15z out so i can get the whole thing. gonna strip it down to the bare, so i don't have different color inside the doors.

that'll also help me decide what's important to go back in for weight reduction. prolly no rear seats. gotta think on how to do that.

[Vtec_Power]

Originally posted by soulexistence@Sep 19 2005, 02:40 PM

How about sharing what your projects are. What are you doing to your civ? what are your plans? got a unique paint color in mind? Saving up for that turbo? what?

well i wasnt gonna share but..


B20B CRVtec

B20B Block
Eagle Rods
Wiseco Pistons with 11.0:1 Rings
B16 Head with ITR cams and Valvetrain
LS Tranny with Type-R Final Gear.
100 shot of nitrous
ARC induction Box
Fidanza (or Spoon... havent decided) flywheel
Exedy StageII clutch
CTR N1 crank pulley (if it fits the B20 block)
TODA cam gears
P28 running Uberdata

*maybe* Boost through a turbo

JDM Ferio Door Panels
JDM Cluster
JDM HOP center Console
Mugen Twin-Loop Catback Exhaust
JDM ITR Exhaust Mani.
Rear disc conversion
Omnipower clutch master cylinder
B&M straight short shifter with Energy suspension bushings
Eventually down the line I want to do a 5-lug conversion and slap some Gunmetal ITR wheels on it... OR i'm gonna swap the Si's for some blades.

I am going to leave the HUGE dents on my rear door and rear 1/4 panel and havent decided if i'm going to fix the rust... but I am planning on painting the car Flamenco Black Pearl.

like everything tho.. most of these plans are still up in the air... who knows what a new day will bring.

[Smooth_Imports]

Originally posted by soulexistence@Sep 19 2005, 01:40 PM

How about sharing what your projects are. What are you doing to your civ? what are your plans? got a unique paint color in mind? Saving up for that turbo? what?

Current Setup:
96Lx 4dr W/B18b1

Engine:
Greddy 18g turbo w/intercooler
Greddy Type-S BOV
Rc 310 injectors
B&M FPR
Apexi world sport catback
Magnaflow High flow cat

Suspension:
Neuspeed front strut bar
---Thats it i sold it all in the spring

Electronics & Meters:
Greddy blue box (POS)
Apexi Turbo Timer
Oil pressure
Vac/boost
A/F

Parts waiting to be installed:
Uberdata
Moroso oil pan
Golden Eagle vacuum manifold
Summit SB oil feed line
Summit SB oil return line

Future plans, Full rebuild in the next 9 months.

[sjsotelo]

I have a stock 98 DX...

Not to many engine mods as of yet.

For the engine:

Exedy OEM clutch
Full Syn oil

For the outside: (all this is up in the air for sure)

JDM front bumper
JDM rear bumper
2 front fenders with the EK side lights
OEM Hood
Type R Grill
Type R Lip

Rear wing, not sure if I want the stock one or the one that?s a bit higher with the LED break lights in it.

On the inside: (all this is up in the air for sure)

EX gauge cluster
new carpet
All new center stuff, new shifter nob
JDM cup holder section

Not sure what im going to do with the seats, I might do this:
leather seat covers
or if i will just get racing seats

This will make the car drivable, so can use it as my daily driver

Everything is up in the air, but this is what I got so far... I have more stuff I want to do once I get it drivable.

-Stephen

[Synergy CiViC]

1994 Civic Ex:

Engine Mods:

Rebuilt D16Z6 (blew the other one)
AEM Cold Air Intake
Apex-i N1 Catback Exhaust with Custom piping
Exedy Stage 1 Clutch
NGK wires and plugs

ICE:

Alpine Mp3 Player
4X6.5 Infinity Reference Speakers
12 inch subs and amp were Stolen a year ago or so.

Exterior mods:

Had Full Streefighter 1 body kit.. Smashed to pieces during a hit and run overnight while my car was parked.. Only have side skirts left and one of them is now broken.. Also had Euro Clears and Projectors with PIAA super Plasma bulbs..

ALL TRASHED.. Full coverage is your friend!

I believe thats it.... Ive had very bad luck with this car.. hopefully the next one is better..

Future Mods: Maybe a DC Sports 4-2-1 Header if i come into some extra cash but i doubt it..... Getting STi next year.

[Doughboy]

SOHC mods

15.5 > on an auto btw

motor-

55 shot of nitrous
4-1 header
Shortram intake
b&m Fuel pressure regulator(for nitrous)
Testpipe (no cat)
greddy evo exhaust


suspension-

Megan Lower control arms
x- trunk brace
upper and lower tie bars
C- pillar bar
tokico hp shocks .....and yes I like em!!
neuspeed springs 2.25
and I ride on 15 inch 12lb each gunmetal speedmasters on cheapie tires.


B18c1 by next april, starting build in February hopefully.. (crosses fingers)

[NstyGrnHatch]

Motor:

-94 B18C1
-CTR Crank Pulley
-Apexi N1 Exhaust
-ACT Prolite Flywheel
-ACT Stage 2 Clutch
-Equal Length Tubular Turbo Manifold
-XS Power .57 Trim Turbo
-XS Power 29"x11"x3" Intercooler
-XS Power 3" Downpipe
-Energy Suspension motor mount inserts
-Greddy Timing Belt
-Inline pro headgasket
-Inline pro camgears
-RC 750cc Injectors
-Blox intake manifold
-BBK throttle body
-Greddy Charge Pipes
-Greddy Type S BOV

Suspension:

-15" Kosei K1's
-BFG KDW 205/50/15
-KYB AGX's
-Tanabe Super Procedo Down Lowering springs
-Energy Suspension Master Bushing Kit
-Cusco Front Strut bar
-Weapon R Rear X Brace
-GSR Front 23mm Sway Bar
-ITR Rear 22mm Sway Bar
-A Spec Racing Reinforcement kit
-Wicked Tuning rear lower control arms
-Autopower roll bar

Interior:

-GSR Cloth Seats
-Skunk2 Shift knob
-Alpine Head unit
-Boston Acoustic speakers
-Pyramid Amp

Exterior:

-VIS Carbon Fiber Hood
-VIS Carbon Fiber Duckbill
-EX Front lip

Brakes:

-GSR Front Brakes
-1" Master Clyinder Conversion
-GSR Rear Brakes
-SS Lines on all 4 corners

Tuning:

-Uberdata
-Greddy Profec B Boost Controller

[CivicSi04']

2001 Integra LS

Mods-
Hardcore Tuning Ground Kit
Act Street Clutch Kit(waiting to be installed)
Fidanza 9.5lb Flywheel(waiting to be installed)
Silverstar Bulbs
NGK Iriduim Plugs(Sittin in the glove box)
Optima Yellowtop

Soon to come-
Better tires, probably Falken Zeix 512 for the winter
Apexi N1 Catback
Comtech or DC header
AEM V2
MSD wires, modified distributor cap and rotor, and blaster coil
BBK Intake Mani, and throttle body

theres more but this all depends on funds and if everything stays good over the winter, just hit 60k and i heard the radiators crack at the top around 70 to 80 on the tegs. so if that happens an all aluminum fluidyne is going in with FAL fans
High Flow Cat