| 11-14-2004, 05:53 AM | #1 |
|
hey guys i found the write up on the site about the rear disc convertion. very good, i got mine done but here is where i ran into the problem. the brake cables now i got my set up out of a 93 civic si and i put it on my 97 civic lx but it is a four door i didn't put the cables in because it was shorter then the ones that came off my civic with the drums. what should i do? which car should i get the brake cables off of? and where did anyone find the brake cables for 60 bucks on that write up honda wants 86 bucks for one!!
http://www.civicland.com/forums/inde...showtopic=1528
__________________
GOT VTEC?</span> <span style=\'color:red\'>got some stuff for sale also 97 lx tranny no grinds no anything in the shed not sitting outside 100 shipped or trade for a set of springs a b18b block but it needs work new pistons and i would say new sleeves it has eagle rods in it and stock crank 75bucks shipped or trade for a set of springs d series power steering pump 30 shipped |
|
|
|
|
| 11-15-2004, 03:38 AM | #2 |
|
that was actually my car that I did the conversion on, and you can buy the ebrake cables from hondaautomotiveparts.com they should supply you with them for a decent price.
__________________
www.brauningmotorsports.com 1992 Civic Hatch - T (almost running) 2006 Scion xB (Daily Driver) |
|
|
|
|
| 11-15-2004, 03:44 AM | #3 |
|
did you email them with your info or did you look it up because i can't find it all i see is for drums let me know thanks man
__________________
GOT VTEC?</span> <span style=\'color:red\'>got some stuff for sale also 97 lx tranny no grinds no anything in the shed not sitting outside 100 shipped or trade for a set of springs a b18b block but it needs work new pistons and i would say new sleeves it has eagle rods in it and stock crank 75bucks shipped or trade for a set of springs d series power steering pump 30 shipped |
|
|
|
|
| 11-15-2004, 03:56 AM | #4 |
|
for your car you need the brake cables for a 92-95 SI hatch that came with disc's in the back or a 99-00 SI cables
__________________
www.brauningmotorsports.com 1992 Civic Hatch - T (almost running) 2006 Scion xB (Daily Driver) |
|
|
|
|
| 11-15-2004, 04:49 AM | #5 |
|
ok well i have the cables from a 93 si hatch so you are saying i can use it? but it seems to short but i can try it over the weekend thanks
__________________
GOT VTEC?</span> <span style=\'color:red\'>got some stuff for sale also 97 lx tranny no grinds no anything in the shed not sitting outside 100 shipped or trade for a set of springs a b18b block but it needs work new pistons and i would say new sleeves it has eagle rods in it and stock crank 75bucks shipped or trade for a set of springs d series power steering pump 30 shipped |
|
|
|
|
| 11-15-2004, 04:51 AM | #6 |
|
hmmm i would try some 99-00 SI cables, i forgot you were doing a 4 door. Ive seen people with 4 door Ek do the disc swap so i would try the EK cables even though I dont think they are any longer.
__________________
www.brauningmotorsports.com 1992 Civic Hatch - T (almost running) 2006 Scion xB (Daily Driver) |
|
|
|
|
| 11-15-2004, 05:24 AM | #7 |
|
where can i find the wheel base for the different civic so i can see if they will match up like if the 93 si will match up with my 97 four door
__________________
GOT VTEC?</span> <span style=\'color:red\'>got some stuff for sale also 97 lx tranny no grinds no anything in the shed not sitting outside 100 shipped or trade for a set of springs a b18b block but it needs work new pistons and i would say new sleeves it has eagle rods in it and stock crank 75bucks shipped or trade for a set of springs d series power steering pump 30 shipped |
|
|
|
|
| 11-15-2004, 05:57 AM | #8 |
|
hmmm i dunno on that one, why dont you just take the cable and match them up and see if they are the same length, i dont think wheel base is gonna help you.
__________________
www.brauningmotorsports.com 1992 Civic Hatch - T (almost running) 2006 Scion xB (Daily Driver) |
|
|
|
|
| 11-15-2004, 04:22 PM | #9 |
|
i figured the wheel base would help me so i know the length if i have the same wheel base then i figured i would be good
__________________
GOT VTEC?</span> <span style=\'color:red\'>got some stuff for sale also 97 lx tranny no grinds no anything in the shed not sitting outside 100 shipped or trade for a set of springs a b18b block but it needs work new pistons and i would say new sleeves it has eagle rods in it and stock crank 75bucks shipped or trade for a set of springs d series power steering pump 30 shipped |
|
|
|
|
| 11-15-2004, 04:34 PM | #10 |
|
Senior Member
Join Date: Jul 2003
Posts: 5,381
|
i got my parts from richard/jd over at olympus for this.. check them out too
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Rear Drum Brake Adjustment | artbuc | General Tech | 1 | 12-12-2005 06:15 PM |
| Brake Convertion | luckysouthpaw | Suspension | 2 | 06-07-2005 05:18 AM |
| rear disk brake swap diy | imported_biocac | Doing your own? | 3 | 11-19-2003 06:39 AM |
| - REAR DISK BRAKE SWAP - | imported_biocac | 4 Gen MISC | 0 | 11-19-2003 06:36 AM |
| Rear Disc Brake Conversion | imported_RST531 | Do-It-Yourself | 8 | 11-05-2003 04:49 AM |