 |
||
Water Temperature Gauge Installment
|
||
 |
| 05-26-2005, 06:36 AM | #1 |
|
Member
Join Date: Jan 2005
Posts: 31
|
bought a air/fuel and water temperature gauge, both 2 1/16 inches. i know how to connect the air/fuel and it works fine but all the people i've asked so far don't know about the temperature gauge, it has four wires coming out, i know one is power, ground, and one for the light but where does the other go to? i have a 94 vx hb and have a water temperature on the cluster but i'm not sure how it would connect to that, anyone have any ideas?
|
|
    
|
| 05-26-2005, 12:03 PM | #2 |
|
Senior Member
Join Date: Jul 2003
Posts: 2,654
|
Tap the wire off of your stock temp unit. It's a pin plug on the head. Lower and to the left of the dizzy.
|
|
|
|
| 08-25-2005, 08:30 AM | #3 |
|
Junior Member
Join Date: Aug 2005
Posts: 8
|
the Yellow/Green wire is the coolent temp. Splice into that for ur water temp gauge. My aftermarket gauge runs at 140 on cool days and 175 on hot days, so go from there to determine of the gauge is working OK
|
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 97 Hatch Water Leak | JC_Viola | 96-00 Civic | 9 | 09-16-2005 05:39 PM |
| Leaking Water From Driver Side Of Engine | imported_cyphre01 | General Tech | 19 | 06-10-2005 10:28 AM |
| Water Pump | baSeLiNe_BaLLa | Civic | 4 | 05-21-2004 11:06 PM |
| Water Leakage Inside The Car | blkcivic93 | General Tech | 4 | 03-19-2004 11:41 PM |
| Adding A Water Temp Gauge | imported_silentstorm | 96-00 Civic | 1 | 08-14-2003 02:55 AM |
Linear Mode
